EPS Products >> Heat Treat Furnace >> Drop Bottom Quench Furnace >> drop bottom furnace R 24 S
R-24-S Cress Drop Bottom Quench Furnace
Model Number: R-24-S
Drop Bottom Furnace Applications: This bottom opening quick quench furnace is designed for aluminum heat treatment. Temperature gradients are plus or minus 5°F. or less.
FURNACE CONTROLS: The R-24-S Drop Bottom Quench Furnace comes standard with a Model SD, digital LED readout microprocessor programmable control mounted in a separate free standing control cabinet.
GENERAL CONSTRUCTION: The furnace door can be opened and the load rack can be lowered into quench tank manually within six seconds. Door rolls easily on casters mounted on inclined track. Air assist to raise and lower loads up to 1000 lbs. easily. Uniform temperature is accomplished by a 15" stainless steel fan mounted in the roof which circulates air down sidewalls and up through load. Airflow is directed by a full stainless steel baffle within furnace. Furnace is equipped with an insulated quench tank. Immersion heater with thermostat control optional.
| Heat Treat Furnace Specification Table | |
| Capacity | 15.75 cu. ft. |
| Interior Dimensions WxDxHx in (cm) | 36 x 36 x 21 |
| Exterior Dimensions WxDxH in (cm) | 57.5 x 112 x 146 |
| Temperature Range | 1200F |
| Volts | 230V or 460V (3 Phase) |
| Hertz | 60 cycle |
| KW Input | 30 |
| Quench Tank (w x d x h) | 44 x 47 x 27.5 |
| Download the Brochure | Download Cress_Brochure.pdf |