EPS Products >> Heat Treat Furnace >> Mid Size Heat Treat Furnace Dual >> cress production furnace AE 1824 D
AE-1824-D Cress Dual Chamber Mid-Size Heat Treat Production Furnace
Model Number: AE-1824-D
Cress Dual Chamber Mid Size Production Furnace Application: Designed for those who desire a large hardening furnace plus a separate furnace for tempering or drawing, with a small footprint. The two chambers allow for immediate tempering or drawing after quench without waiting for the hardening furnace to cool to the lower temperature required.
CONTROLS: Both furnace chambers are equipped with their own Cress Autotuning Microprocessor Based Controls, Chromel-Alumel thermocouples and contractors. A switch is provided to turn off elements when either door is opened. Fan stops when lower door is opened. An independent backup control, with contractor and thermocouple, on each chamber is standard.
ELEMENTS: High temperature wire elements are coiled and mounted in easily removable porcelain element plates on each side and bottom of both chambers. Elements are also located on the doors of both furnace chambers. A ceramic hearth plate covers the floor element.
GENERAL CONSTRUCTION: Case is constructed of 18 guage sheet steel metal panels and mounted in angle steel frame. Space is provided for air circulation between chambers and underneath the lower chamber. The door of the upper furnace chamber rises vertically and the door of the lower furnace chamber swings to the side. A chrome plated refrigerator type latch is used to hold lower door closed. (OPTION: Both doors side opening.)
Lower furnace chamber is equipped with a stainless steel, centrifugal type fan to circulate the air and provide very close temperature gradients. Fan is operated by a 1 HP motor. Easy access to furnace controls and wiring is provided by removable panel on control cabinet.
Options for the AE1824-D Cress Dual Chamber Mid-Size Heat Production Furnace are:
- Both Doors Side Opening
- Stainless Steel Port for Protective Inert Atmosphere Operation for Upper Chamber
- Quench Tanks for AE Models
- Audible Process Alarm
- Optional 208 or 480 VAC, 3 Phase
| Heat Treat Furnace Specification Table | |
| Capacity | 8.1 cu. Ft. Total (Upper Chamber: 4.5cu. Ft. Lower Chamber: 3.6cu. Ft.) |
| Interior Dimensions WxDxHx in (cm) | Upper Chamber:18 x 24 x 18Lower Chamber:18 x 19 x 18 |
| Exterior Dimensions WxDxH in (cm) | 36 x 50 x 70 |
| Temperature Range | <b>Upper Chamber:</b> 2250F <b>Lower Chamber:</b> 1250F |
| Volts | 230V (3 Phase AC) |
| KW Input | 27 |
| Weight | 2500 lbs |
| Download the Brochure | Download Cress_Brochure.pdf |