EPS Products >> Lab Ovens >> Clean Room Oven >> cr1 clean room oven
The SHEL LAB brand of clean air ovens incorporate all the special features needed for high temperature cleanroom work: an all heliarc-welded, Type 304 stainless steel interior, including two stainless steel shelves, rapid heat recovery, and two separate LED digital displays for time and temperature that show setpoint or up-to-the-second process information. The Watlow PID (Proportional Integral Differential) controller provides 24-step ramp and soak, 0.1°C control, and multiple levels of operator access. A sealed membrane touch-pad control panel protects the controllers.
Adjustable 3 air intake and exhaust ducts are easily removed for cleaning, and allow use of either room or recirculated air. A nitrogen inlet port for purging is standard to prevent contamination. Made with 3.5 inches of high-temperature, wrap-around insulation and a high-temperature silicone rubber door seal. Punched stainless steel shelves adjustable on 0.5 inch centers. Filter may be weakened if oven is operated above 200°C.
SHEL LAB Ovens are available in a broad matrix of sizes, styles and technology. Some options include:
| Lab Ovens Specification Table | |
| Capacity | 3.9 cu. ft. (110 L) |
| Interior Dimensions WxDxHx in (cm) | 17 x 20 x 20.125 (43.2 x 50.8 x 51) |
| Exterior Dimensions WxDxH in (cm) | 35 x 29 x 38 (89 x 73.7 x 96.5) |
| Temperature Range | ambient +15C to 250C |
| Temperature Uniformity | +/-1.0C at 110C |
| Temperature Recovery Time | 4 minutes to reach 110C |
| Heat-up (min) | 10 min to 110C (35 min to 180C) |
| Volts | 220V |
| Hertz | 50/60 |
| Watts | 2200 |
| Amps | 12A |
| Shelving | 2 Supplied (8 Maximum) |
| Download the Brochure | Download shel-lab-oven.pdf |
| Download the Manual | Download CR1_manual.pdf |