AC1232 Bench Top Furnace

Free Freight Available!

  • 2250F Max Temp.
  • 5 KW input
  • 350 lbs

Email this page:

The AC1232 furnaces are designed for the shop, laboratory or factory where temperatures from 300F to 2250F are required. They are used for assaying, heat treating metal and testing.

TEMPERATURE CONTROLS: Auto tuning Microprocessor-based controller.

SPECIAL FEATURES of the AC1232 Cress Furnace: Embedded elements and clean air exhaust system is installed.

GENERAL CONSTRUCTION: The furnace case is constructed of heavy gauge sheet steel and finished in gray hammertone. The walls and door are constructed of the finest quality insulating fire brick backed up by 1800F block insulation. Alloy wire elements are coiled and mounted on the side walls in easy to change porcelain plates.

SAFETY SWITCH: These models come equipped with dual door safety switches. When the door is opened, power is disconnected from the heating elements.

DOOR: The counter balanced easy to operate door, opens up and away from the furnace, keeping the hot side away from the operator

A KAOWOOL: Seal is installed on the door where it meets the chamber.

OPTIONS:

  • Stands and quench tanks for these model furnaces are available for an additional cost.
  • Optional inlet port for protective inert atmosphere is available.
  • Optional high limit control available.
  • Audible process alarm.
Interior Dimensions WxDxH in.

12 x 32 x 8

Exterior Dimensions WxDxH in.

25 x 34 x 28

KW Input

5

Weight

250 lbs

Download the Brochure

https://epsovens.com/wp-content/uploads/2017/06/Cress_Brochure.pdf

Maximum Temperature

2250F